|
||||||
 Using AccessLaw Software with CrossOver Mac The following products have been tested and will run using CrossOver Mac Version 8.0.1. These directions are for the 8.0.1 version, we cannot guarantee these directions apply to other versions. CalDVD, CalDisc, USSC+, Jury Instructions |
||||||
|
NOTE: To check your current Crossover Mac Version click CROSSOVER at the top left corner then click ABOUT CROSSOVER. All software must be installed to the hard drive, running from the disc may not run correctly on all systems. Jury Instruction Users with CalDVD/CalDisc must install to the same bottle as CalDVD/CalDisc After the CrossOver Mac installation is complete follow the guide below |
||||||
| 1. |
Open up Crossover, at the top bar click CROSSOVER,
then click PREFERENCES |
|||||
| 2. |
Click the INSTALLER ASSISTANT tab, un-check HIDE
SERVICE PACKS AND DEPENDENCIES, then
close the window. |
|||||
| 3. |
On the CrossOver main window click MANAGE BOTTLES
|
|||||
| 4. |
On the left side you will see a list of your current bottles, if
you want to delete any you are not using click the –
sign below the list |
|||||
| 5. | Click the + sign, name the bottle accordingly (CalDVD, USSC+, etc.), type should be winXP, click CREATE | |||||
| 6. |
Click the bottle you just created, click the tab
APPLICATIONS on the top right, click INSTALL
SOFTWARE |
|||||
| 7. |
Scroll down towards the bottom of the list and click on
MICROSOFT VISUAL C++ 2005 REDISTRIBUTABLE, click
CONTINUE |
|||||
| 8. |
Install into the bottle you just created, the program will
download the file then begin install, click YES
to install, click FINISH |
|||||
| 9. |
Insert the AccessLaw Software Disc, once CrossOver pops up click
ADVANCED INSTALL |
|||||
| 10. |
Click INSTALL UNSUPPORTED SOFTWARE, click
CONTINUE |
|||||
| 11. |
You need to install to the bottle you created above, Click
OTHER EXISTING BOTTLE, scroll to the correct
bottle, click CONTINUE |
|||||
| 12. |
AccessLaw software will pop up, click FULL INSTALL
|
|||||
| 13. | Once installation is complete you can access the installed software by clicking PROGRAMS on the top bar. | |||||
| Home Products and Services Customer Support Contact | ||||||
